The necessity of grain drying
The moisture content of the rice in the warehouse is the key to whether the rice can be stored safely.
- Grain harvest 1 to 3 times a year, and some need to store for several years. Grains are living organisms, and moisture is the condition for their survival. But too high water will lead to the breeding of insects and micro-organisms, resulting in cereal fever, fermentation, and deterioration and germination rate decreased. The Grain' moisture content of 25 to 30% when in the harvest, so as soon as possible to the safe moisture content of 13 to 14%.
- Take rice as an example to illustrate the importance of drying.
Moisture below 18% of the rice can be stored at near room temperature for longer periods of time. However, even if the high water content of rice at room temperature due to microbial erosion, brown rice grain surface pollution generated brown or dark brown spots, brown rice grain quality deterioration, grade decreased; During the process of rice milling , the spot of brown spreading which resulting the quality of rice second deterioration, taste worse, even unable consumption. If the moisture content of more than 24% of the rice stacking a day is also very dangerous.
Product Description
Performance characteristics
Mingyang equipment drying quality
1. The impurities after cleaning do not exceed 1%;
2. The crushing rate increases by less than 0.5% after drying;
3. The increase in the burst waist rate after drying is less than 1.1%;
4. The uniformity of moisture after drying is not more than 0.7% (the uniformity of moisture in the incoming rice is less than 3%);
Appearance
The hot blast stove uses indirect heat exchange to form a clean hot air supply to the dryer to dry the grain, so as to ensure the original color, aroma and taste of the grain, and the rice has a good taste, no peculiar smell, and the color is crystal clear;
hot blast stove grain dryers are used for drying agricultural products: corn,maize,wheat,peanuts,oil seed,etc.
The drying process is to remove humidity and prevent the products from fungi or mildew,which provides the possibility of longer time storage.
· The grain dryer equipment has a simple structure; Small volume after dismantling,easy for transportation and movement.
· Equipped with online moisture meter,automatic moisture control to prevent over-drying and weight loss.
· Automatic temperature control system:the hot air temperature and air volume can be adjusted during drying process automatically to ensure the top drying quality.
· Highly automated operation with microcomputer control to reduce labor and improve working efficiency.
· Increased drying area and the drying speed is accelerated.
Safety
Mingyang Machinery uses the biomass pellet hot blast stove as the heat source equipment, and the biomass pellets are burned cleanly in the air, and there is no pressure in the whole process.
1. It does not need to be tested by the quality and safety department
2. The staff does not need to hold a certificate to work
3. The cold air is heated through the pipe wall through the heat exchanger to provide safe hot air for the dryer
Energy saving
Mingyang hot blast stove uses renewable energy biomass pellets as fuel, realizes waste utilization, responds to national green environmental protection requirements, and provides a relatively closed combustion environment to avoid heat loss.
High degree of automation:
1. It will automatically alarm after the valley is full.
2. The pellet furnace automatically adjusts the size of the biological particle supply according to the temperature of the dryer.
3. The temperature is automatically calibrated by the thermostat to provide hot air at a constant temperature.
4. The rice will automatically stop after drying to the moisture meter to set the moisture.
5. After the machine is abnormal, it will automatically stop to protect the machinery, and accurately provide the abnormal location and abnormal cause, saving a lot of time for maintenance.
Project Cases
Company strength
Our Services
A. Order Process
INQUIRY → QUOTATION → AGREEMENT → ORDER CONFIRM → PROFORMA INOICE OR CONTRACT → DOWN PAYMENT → PRODUCTION → BALANCE PAYMENT → DELIVERY → DOCUMENTS DESPATCH → GOODS COLLECTION → INSTALLATION → OPERATION → FEEDBACK
B. OEM & ODM are welcome;
C. Technical support for your installation,operation and maintenance.
D. One year's warranty, and you can pay for extended warranty.All life time technical support.
E. Spare parts and technical support at most economic prices after the warranty.
FAQ
1.How about the quality of your product?
-- Our products manufactured strictly according to national and international standard.
-- We take a test on every product before delivery.
2. How about the price?
--We are manufactory, and we can give you lowerprice than those trade companies. Besides, customers from Made-in-China can get a discount.
3. How about delivery time of your machine?
-- Generally it needs 15-30days for big machines or producing line,and it will be much longer but within our negotiateddelivery time.
4. Are you interested in dealership with local company?
---Yes, we are quite interested in this business. We'd like to cooperate with some local partner to sell more machines in local market and supply better service.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}